Technical parameter
Installation dimensions
Model description
Working Principle
Technical parameter
|
Body |
|
| Bore | DN15~DN500mm |
| Nominal pressure | PN16~PN420,5K~63K,150LB~2500LB |
| Applicable temperature | -196℃~+650℃ |
| Applicable medium | gas,water,oil,steam etc |
| Connection | flange,SW |
| Bonnet type | Normal type ,High temperature type, Bellows type , Low temperature type |
| Stuffing | PTFE,Flexible graphite |
| Seat | PTFE |
| Body material | WCB,WC6,WC9,CF8,CF8M,CF3M etc |
|
Trim |
|
| Flow Characteristic | quick-open, equal percentage, Linear |
|
Actuator |
|
| Type | Single spring diaphragm cylinder,multi-spring diaphragm cylinder,piston type/Double-acting cylinder,electric. |
Installation dimensions
Model description
| Model | Introduction | |
| FIG680 | ||
| Valve type | TYP300 | CV3000 type |
| TYP900 | forged steel sleeve type steam trap valve | |
| TYP910 | forged steel labyrinth control valve | |
| TYP920 | forged steel cascade throttle control valve | |
| FIG580 | 2 ways control valve | |
| FIG680 | 3 ways control valve | |
| FIG681 | 3 ways bellows sealing control valve | |
| JX480 | slide valve | |
| Actuator | A | single spring diaphragm type |
| B | multi-spring diaphragm type | |
| C | single action piston | |
| C1 | double action piston | |
| D | electric | |
| F | electric-hydraulic | |
| E | manual | |
| G | pneumatic-hydraulic | |
| H | other | |
| Open/Close type | 1 | air to open type |
| 2 | air to close type | |
| 3 | electricity to open | |
| 4 | electricity to close | |
| Action type | A | direct action |
| B | reaction | |
| Handwheel | 1 | without handwheel |
| 2 | top mount the handwheel | |
| 3 | Side mount the handwheel | |
| Connection | F | flange |
| H1 | butt welding | |
| H | socket | |
| S | internal thread | |
| S1 | external thread | |
| J | wafer type | |
| K | other | |
| Valve trim structure | 1 | shut-off valve |
| 2 | sleeve single seat valve | |
| 3 | sleeve double seat valve | |
| 4 | porous type noise reduction cage | |
| 5 | labyrinth cage | |
| 6 | multistage depressurization type cage | |
| 7 | other | |
| Valve core structure | A | balanced internal parts |
| B | unbalanced internal parts | |
| Valve bonnet type | 1 | standard type |
| 2 | cooling fin type | |
| 3 | lengthen type | |
| 4 | bellow type | |
| 5 | clamp cover type | |
| 6 | other | |
| Flow characteristic | 1 | quick opening |
| 2 | linear | |
| 3 | equal percent | |
| 4 | fixed percentage | |
| Valve seat material | 1 | RPTFE |
| 2 | alloy steel | |
| 3 | cemented carbide | |
| 4 | tungsten steel | |
| 5 | other | |
| Norminal diameter | DN | DN15-DN500 |
| Norminal pressure | PN | PN10-PN760 |
| LB | 150LB-2500LB | |
| K | 5K-60K | |
| Material type | 1 | WCB |
| 2 | WC6 | |
| 3 | WC9 | |
| 4 | CF8 | |
| 5 | CF3 | |
| 6 | CF8M | |
| 7 | CF3M | |
| 8 | A105 | |
| 9 | F91 | |
| 10 | F22 | |
| 11 | other | |
| Illustraton | ||
| 1、TYP300-B-1-A-2-F-2-A-1-3-1-DN50-PN25-CF8 | ||
| 1.CV3000 series，Multi-spring diaphragm cylinder,air to open type,direct action,top mount the handwheel,sleeve single seat valve,balanced internal parts ,standard valve bonnet,equal percent type,RPTFE valve seat,norminal diameter DN50,norminal pressure PN25,CF8 material. | ||
Working Principle
